Language: Chinese line English

CNC System

  • XC809D series multi-function CNC system for carving and milling
XC809D series multi-function CNC system for carving and milling

XC809D series multi-function CNC system for carving and milling

XC809D series carving and milling multi-functional CNC system is a new generation of CNC system developed by our company. Support carving, milling, drilling, tapping processing. Using 32-bit high-performance microprocessor, real-time multi-task control technology and hardware interpolation technology, full linkage, high-speed small line segment forward-looking algorithm. 0.001mm interpolation accuracy, maximum speed of 30 m/min. It is the best choice for engraving machine, small machining center, CNC milling machine and CNC drilling machine.
XC809D series software and hardware features:
★ Based on 32-bit microprocessor, full linkage, 0.001mm interpolation accuracy, maximum speed of 30 m/min, support direction + pulse and orthogonal pulse.
★ 7 inch color widescreen LCD, resolution 800×480, Windows interface style. Equipped with 8 soft function keys, the operation is easy to learn. Provide parameter classification, alarm log, system diagnosis and other rich display interface, convenient debugging and maintenance.
International standard G instruction, compatible with FANUC system instruction.
★40 kinds of G instruction, support drilling cycle, tapping cycle.
Parts program full screen editing, built-in 512M massive program space, can store 500 parts program.
★ With USB interface, support U disk file reading and writing, data backup.
★ Input 24(expandable to 96) points, output 24(expandable to 96) points (custom), flexible and convenient.
★ English and Chinese operation interface, complete help information, more convenient operation.
★ The system adopts pre-interpolation acceleration and deceleration control.
Support long knife filling and radius knife filling.
★ Support hand wheel test processing, convenient program debugging.
★ Support multi-level operation rights, convenient device management, with time-limited system lock function.
★ Support UG, Mastercam, PowerMill, FeatureCAM, ArtCAM, JDPaint, Wentai and other third-party software G code files.
Support self programming knife library, flexible use of a variety of knife library.

Technical specifications
The basic function
Number of control axes 3 to 6 axes (X, Y, Z, A, B, C)
3 axis :XC809DC, 4 axis :XC809DD, 5 axis :XC809DE, 6 axis :XC809DF,
Number of linkage axes Full linkage
Knife library support, need to edit knife library code
Spindle 2 analog spindles, of which spindle 1 can use digital spindle (occupy one digital axis)
Spindle monitoring
Minimum instruction unit 0.001 mm
Maximum instruction ±99999999 x minimum instruction unit
Fast feed speed 30,000mm/min
Fast feed multiplier F0, 25%, 50%, 75%,100%
Pulse mode 1: Direction + pulse
2: Orthogonal pulse (if the driver supports, recommended, stronger interference)
Maximum frequency 100Khz,200Khz,500KHz can be set.
(500KHz can only be achieved with all axis orthogonal output modes)
Feed rate is 0 ~ 150%
Electronic gear ratio 1 to 65535
Automatic acceleration and deceleration
High-speed small line segment forward-looking algorithm has
Hand wheel trial processing
Positioning G00 (linear interpolation positioning)
Interpolation line (G01), arc (G02/G03/G12), spiral interpolation
Automatic return to reference point (G28)
LCD 7-inch TFT LCD screen, resolution 800×480
Software keys 8
Step through x1, x10, x100
Communication port Usb port
External handwheel interface available
I/O interface 24/24(expandable to 96/96)
Pause (seconds) Yes
The quasi-stop state has
There must have stopped
Storage trip check yes
MDI operation has support for multi-stage operation
Reset is
Skip switches have
A single segment run has
The program protection switch has
The self-diagnosis function has
Emergency stop there
Power supply single-phase AC220V+10%-15%, 50Hz±1Hz
Coordinate system Machine coordinate system (G53), workpiece coordinate system (G92, G54 ~ G59), local coordinate system (G52), coordinate system plane specified
The automatic coordinate system is set to
The decimal input has
Auxiliary function
Auxiliary function M2 digit, M code custom, manual /MDI/ automatic control spindle forward, reverse, stop; Control coolant start and stop; Control lubrication start and stop etc
Main function
Spindle function double spindle
Digital spindle spindle 1 support, occupy a digital axis (Z axis does not support), the speed is more stable.
Threading support
Spindle analog output has, double spindle
Function of cutting tool
Tool function support automatic tool change, support points in the center of the tool, three fixed center of the tool
Tool compensation memory -9999.999 ~ 9999.999, 99
The tool compensates the tool length and radius
Edit operation
Edit function parameters, diagnostic bitwise input, program editing, MDI multi-program execution
Storage capacity: 512 MB
Number of stored programs 500
Program name display Chinese, English, numbers, combination
Program line lookup has
Skip optional program segments have
Program switch has
According to
Display Chinese, English
Processing time and number of parts are shown
Spindle speed, M/S instruction has
Host size (mm)
Dimensions (length × width × thickness) 390×253×80
Opening size (l × W) 370×228

LATEST NEWS

CONTACT US

Contact:

Phone: 13812080602

Tel: 0510-85586857

Email: xcmcu@126.com

Add: